MeterIdentification

class st.zigbee.zcl.clusters.MeterIdentification

ID: number: 0x0B01 the ID of this cluster

NAME: str: “MeterIdentification” the name of this cluster

attributes: st.zigbee.zcl.clusters.MeterIdentificationServerAttributes or st.zigbee.zcl.clusters.MeterIdentificationClientAttributes

commands: st.zigbee.zcl.clusters.MeterIdentificationServerCommands or st.zigbee.zcl.clusters.MeterIdentificationClientCommands

types: st.zigbee.zcl.clusters.MeterIdentificationTypes

MeterIdentification Attributes

class st.zigbee.zcl.clusters.MeterIdentification.CompanyName

ID: number: 0x0000 the ID of this attribute

NAME: str: “CompanyName” the name of this attribute

data_type: st.zigbee.data_types.CharString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a CharString object of this attribute with any additional features provided for the attribute

This is also usable with the CompanyName(…) syntax

Parameters: vararg (vararg) – the values needed to construct a CharString
Return type: st.zigbee.data_types.CharString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.CharString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.MeterTypeID

ID: number: 0x0001 the ID of this attribute

NAME: str: “MeterTypeID” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MeterTypeID(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.DataQualityID

ID: number: 0x0004 the ID of this attribute

NAME: str: “DataQualityID” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the DataQualityID(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.CustomerName

ID: number: 0x0005 the ID of this attribute

NAME: str: “CustomerName” the name of this attribute

data_type: st.zigbee.data_types.CharString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a CharString object of this attribute with any additional features provided for the attribute

This is also usable with the CustomerName(…) syntax

Parameters: vararg (vararg) – the values needed to construct a CharString
Return type: st.zigbee.data_types.CharString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.CharString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.CharString) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.Model

ID: number: 0x0006 the ID of this attribute

NAME: str: “Model” the name of this attribute

data_type: st.zigbee.data_types.OctetString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a OctetString object of this attribute with any additional features provided for the attribute

This is also usable with the Model(…) syntax

Parameters: vararg (vararg) – the values needed to construct a OctetString
Return type: st.zigbee.data_types.OctetString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.OctetString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.PartNumber

ID: number: 0x0007 the ID of this attribute

NAME: str: “PartNumber” the name of this attribute

data_type: st.zigbee.data_types.OctetString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a OctetString object of this attribute with any additional features provided for the attribute

This is also usable with the PartNumber(…) syntax

Parameters: vararg (vararg) – the values needed to construct a OctetString
Return type: st.zigbee.data_types.OctetString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.OctetString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.ProductRevision

ID: number: 0x0008 the ID of this attribute

NAME: str: “ProductRevision” the name of this attribute

data_type: st.zigbee.data_types.OctetString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a OctetString object of this attribute with any additional features provided for the attribute

This is also usable with the ProductRevision(…) syntax

Parameters: vararg (vararg) – the values needed to construct a OctetString
Return type: st.zigbee.data_types.OctetString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.OctetString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.SoftwareRevision

ID: number: 0x000A the ID of this attribute

NAME: str: “SoftwareRevision” the name of this attribute

data_type: st.zigbee.data_types.OctetString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.OctetString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a OctetString object of this attribute with any additional features provided for the attribute

This is also usable with the SoftwareRevision(…) syntax

Parameters: vararg (vararg) – the values needed to construct a OctetString
Return type: st.zigbee.data_types.OctetString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.OctetString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.UtilityName

ID: number: 0x000B the ID of this attribute

NAME: str: “UtilityName” the name of this attribute

data_type: st.zigbee.data_types.CharString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a CharString object of this attribute with any additional features provided for the attribute

This is also usable with the UtilityName(…) syntax

Parameters: vararg (vararg) – the values needed to construct a CharString
Return type: st.zigbee.data_types.CharString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.CharString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.POD

ID: number: 0x000C the ID of this attribute

NAME: str: “POD” the name of this attribute

data_type: st.zigbee.data_types.CharString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a CharString object of this attribute with any additional features provided for the attribute

This is also usable with the POD(…) syntax

Parameters: vararg (vararg) – the values needed to construct a CharString
Return type: st.zigbee.data_types.CharString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.CharString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.AvailablePower

ID: number: 0x000D the ID of this attribute

NAME: str: “AvailablePower” the name of this attribute

data_type: st.zigbee.data_types.Int24: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Int24) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Int24) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Int24 object of this attribute with any additional features provided for the attribute

This is also usable with the AvailablePower(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Int24
Return type: st.zigbee.data_types.Int24

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Int24) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.MeterIdentification.PowerThreshold

ID: number: 0x000E the ID of this attribute

NAME: str: “PowerThreshold” the name of this attribute

data_type: st.zigbee.data_types.Int24: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Int24) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Int24) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Int24 object of this attribute with any additional features provided for the attribute

This is also usable with the PowerThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Int24
Return type: st.zigbee.data_types.Int24

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Int24) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

MeterIdentification

MeterIdentification Attributes

MeterIdentification Commands