PhMeasurement

class st.zigbee.zcl.clusters.PhMeasurement
ID: number

0x0409 the ID of this cluster

NAME: str

“PhMeasurement” the name of this cluster

attributes: st.zigbee.zcl.clusters.PhMeasurementServerAttributes or st.zigbee.zcl.clusters.PhMeasurementClientAttributes
commands: st.zigbee.zcl.clusters.PhMeasurementServerCommands or st.zigbee.zcl.clusters.PhMeasurementClientCommands
types: st.zigbee.zcl.clusters.PhMeasurementTypes

PhMeasurement Attributes

class st.zigbee.zcl.clusters.PhMeasurement.MeasuredValue
ID: number

0x0000 the ID of this attribute

NAME: str

“MeasuredValue” the name of this attribute

data_type: st.zigbee.data_types.Uint16

the data type of this attribute

augment_type(base_type_obj)
Parameters:

base_type_obj (any)

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters:
Returns:

containing an AttributeReport body

Return type:

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters:
Returns:

containing an ReadAttributeResponse body

Return type:

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MeasuredValue(…) syntax

Parameters:

vararg (vararg) – the values needed to construct a Uint16

Return type:

st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters:

device (st.zigbee.Device)

Returns:

containing a ReadAttribute body

Return type:

st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters:

  • device (st.zigbee.Device)

  • min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute

  • max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute

  • rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns:

containing a ConfigureReporting body

Return type:

st.zigbee.ZigbeeMessageTx

class st.zigbee.zcl.clusters.PhMeasurement.MinMeasuredValue
ID: number

0x0001 the ID of this attribute

NAME: str

“MinMeasuredValue” the name of this attribute

data_type: st.zigbee.data_types.Uint16

the data type of this attribute

augment_type(base_type_obj)
Parameters:

base_type_obj (any)

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters:
Returns:

containing an AttributeReport body

Return type:

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters:
Returns:

containing an ReadAttributeResponse body

Return type:

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MinMeasuredValue(…) syntax

Parameters:

vararg (vararg) – the values needed to construct a Uint16

Return type:

st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters:

device (st.zigbee.Device)

Returns:

containing a ReadAttribute body

Return type:

st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters:

  • device (st.zigbee.Device)

  • min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute

  • max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute

  • rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns:

containing a ConfigureReporting body

Return type:

st.zigbee.ZigbeeMessageTx

class st.zigbee.zcl.clusters.PhMeasurement.MaxMeasuredValue
ID: number

0x0002 the ID of this attribute

NAME: str

“MaxMeasuredValue” the name of this attribute

data_type: st.zigbee.data_types.Uint16

the data type of this attribute

augment_type(base_type_obj)
Parameters:

base_type_obj (any)

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters:
Returns:

containing an AttributeReport body

Return type:

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters:
Returns:

containing an ReadAttributeResponse body

Return type:

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MaxMeasuredValue(…) syntax

Parameters:

vararg (vararg) – the values needed to construct a Uint16

Return type:

st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters:

device (st.zigbee.Device)

Returns:

containing a ReadAttribute body

Return type:

st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters:

  • device (st.zigbee.Device)

  • min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute

  • max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute

  • rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns:

containing a ConfigureReporting body

Return type:

st.zigbee.ZigbeeMessageTx

class st.zigbee.zcl.clusters.PhMeasurement.Tolerance
ID: number

0x0003 the ID of this attribute

NAME: str

“Tolerance” the name of this attribute

data_type: st.zigbee.data_types.Uint16

the data type of this attribute

augment_type(base_type_obj)
Parameters:

base_type_obj (any)

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters:
Returns:

containing an AttributeReport body

Return type:

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters:
Returns:

containing an ReadAttributeResponse body

Return type:

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the Tolerance(…) syntax

Parameters:

vararg (vararg) – the values needed to construct a Uint16

Return type:

st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters:

device (st.zigbee.Device)

Returns:

containing a ReadAttribute body

Return type:

st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters:

  • device (st.zigbee.Device)

  • min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute

  • max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute

  • rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns:

containing a ConfigureReporting body

Return type:

st.zigbee.ZigbeeMessageTx

PhMeasurement Commands