PowerConfiguration

class st.zigbee.zcl.clusters.PowerConfiguration

ID: number: 0x0001 the ID of this cluster

NAME: str: “PowerConfiguration” the name of this cluster

attributes: st.zigbee.zcl.clusters.PowerConfigurationServerAttributes or st.zigbee.zcl.clusters.PowerConfigurationClientAttributes

commands: st.zigbee.zcl.clusters.PowerConfigurationServerCommands or st.zigbee.zcl.clusters.PowerConfigurationClientCommands

types: st.zigbee.zcl.clusters.PowerConfigurationTypes

PowerConfiguration Attributes

class st.zigbee.zcl.clusters.PowerConfiguration.MainsVoltage

ID: number: 0x0000 the ID of this attribute

NAME: str: “MainsVoltage” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MainsVoltage(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.MainsFrequency

ID: number: 0x0001 the ID of this attribute

NAME: str: “MainsFrequency” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the MainsFrequency(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.MainsAlarmMask

ID: number: 0x0010 the ID of this attribute

NAME: str: “MainsAlarmMask” the name of this attribute

data_type: st.zigbee.data_types.Bitmap8: the data type of this attribute

MAINS_VOLTAGE_TOO_LOW: number: 1

MAINS_VOLTAGE_TOO_HIGH: number: 2

MAINS_POWER_SUPPLY_LOST: number: 4

is_mains_voltage_too_low_set()

Returns: True if the value of MAINS_VOLTAGE_TOO_LOW is non-zero
Return type: boolean

set_mains_voltage_too_low(): Set the value of the bit in the MAINS_VOLTAGE_TOO_LOW field to 1

unset_mains_voltage_too_low(): Set the value of the bits in the MAINS_VOLTAGE_TOO_LOW field to 0

is_mains_voltage_too_high_set()

Returns: True if the value of MAINS_VOLTAGE_TOO_HIGH is non-zero
Return type: boolean

set_mains_voltage_too_high(): Set the value of the bit in the MAINS_VOLTAGE_TOO_HIGH field to 1

unset_mains_voltage_too_high(): Set the value of the bits in the MAINS_VOLTAGE_TOO_HIGH field to 0

is_mains_power_supply_lost_set()

Returns: True if the value of MAINS_POWER_SUPPLY_LOST is non-zero
Return type: boolean

set_mains_power_supply_lost(): Set the value of the bit in the MAINS_POWER_SUPPLY_LOST field to 1

unset_mains_power_supply_lost(): Set the value of the bits in the MAINS_POWER_SUPPLY_LOST field to 0

augment_type(base_type_obj)

Add additional functionality to the base type object

Parameters: base_type_obj (st.zigbee.data_types.Bitmap8) – the base data type object to add functionality to

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Bitmap8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Bitmap8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Bitmap8 object of this attribute with any additional features provided for the attribute

This is also usable with the MainsAlarmMask(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Bitmap8
Return type: st.zigbee.data_types.Bitmap8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Bitmap8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.MainsVoltageMinThreshold

ID: number: 0x0011 the ID of this attribute

NAME: str: “MainsVoltageMinThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MainsVoltageMinThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint16) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.MainsVoltageMaxThreshold

ID: number: 0x0012 the ID of this attribute

NAME: str: “MainsVoltageMaxThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MainsVoltageMaxThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint16) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.MainsVoltageDwellTripPoint

ID: number: 0x0013 the ID of this attribute

NAME: str: “MainsVoltageDwellTripPoint” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the MainsVoltageDwellTripPoint(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint16) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryVoltage

ID: number: 0x0020 the ID of this attribute

NAME: str: “BatteryVoltage” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryVoltage(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryPercentageRemaining

ID: number: 0x0021 the ID of this attribute

NAME: str: “BatteryPercentageRemaining” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryPercentageRemaining(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryManufacturer

ID: number: 0x0030 the ID of this attribute

NAME: str: “BatteryManufacturer” the name of this attribute

data_type: st.zigbee.data_types.CharString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a CharString object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryManufacturer(…) syntax

Parameters: vararg (vararg) – the values needed to construct a CharString
Return type: st.zigbee.data_types.CharString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.CharString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.CharString) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatterySize

ID: number: 0x0031 the ID of this attribute

NAME: str: “BatterySize” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatterySizeType object of this attribute with any additional features provided for the attribute

This is also usable with the BatterySize(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatterySizeType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryAHrRating

ID: number: 0x0032 the ID of this attribute

NAME: str: “BatteryAHrRating” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryAHrRating(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint16) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryQuantity

ID: number: 0x0033 the ID of this attribute

NAME: str: “BatteryQuantity” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryQuantity(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryRatedVoltage

ID: number: 0x0034 the ID of this attribute

NAME: str: “BatteryRatedVoltage” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryRatedVoltage(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryAlarmMask

ID: number: 0x0035 the ID of this attribute

NAME: str: “BatteryAlarmMask” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatteryAlarmMaskType object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryAlarmMask(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatteryAlarmMaskType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryVoltageMinThreshold

ID: number: 0x0036 the ID of this attribute

NAME: str: “BatteryVoltageMinThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryVoltageMinThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryVoltageThreshold1

ID: number: 0x0037 the ID of this attribute

NAME: str: “BatteryVoltageThreshold1” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryVoltageThreshold1(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryVoltageThreshold2

ID: number: 0x0038 the ID of this attribute

NAME: str: “BatteryVoltageThreshold2” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryVoltageThreshold2(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryVoltageThreshold3

ID: number: 0x0039 the ID of this attribute

NAME: str: “BatteryVoltageThreshold3” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryVoltageThreshold3(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryPercentageMinThreshold

ID: number: 0x003A the ID of this attribute

NAME: str: “BatteryPercentageMinThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryPercentageMinThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryPercentageThreshold1

ID: number: 0x003B the ID of this attribute

NAME: str: “BatteryPercentageThreshold1” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryPercentageThreshold1(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryPercentageThreshold2

ID: number: 0x003C the ID of this attribute

NAME: str: “BatteryPercentageThreshold2” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryPercentageThreshold2(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryPercentageThreshold3

ID: number: 0x003D the ID of this attribute

NAME: str: “BatteryPercentageThreshold3” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryPercentageThreshold3(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.BatteryAlarmState

ID: number: 0x003E the ID of this attribute

NAME: str: “BatteryAlarmState” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatteryAlarmStateType object of this attribute with any additional features provided for the attribute

This is also usable with the BatteryAlarmState(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatteryAlarmStateType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2Voltage

ID: number: 0x0040 the ID of this attribute

NAME: str: “Battery2Voltage” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2Voltage(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2PercentageRemaining

ID: number: 0x0041 the ID of this attribute

NAME: str: “Battery2PercentageRemaining” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2PercentageRemaining(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2Manufacturer

ID: number: 0x0050 the ID of this attribute

NAME: str: “Battery2Manufacturer” the name of this attribute

data_type: st.zigbee.data_types.CharString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a CharString object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2Manufacturer(…) syntax

Parameters: vararg (vararg) – the values needed to construct a CharString
Return type: st.zigbee.data_types.CharString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.CharString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.CharString) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2Size

ID: number: 0x0051 the ID of this attribute

NAME: str: “Battery2Size” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatterySizeType object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2Size(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatterySizeType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2AHrRating

ID: number: 0x0052 the ID of this attribute

NAME: str: “Battery2AHrRating” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2AHrRating(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint16) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2Quantity

ID: number: 0x0053 the ID of this attribute

NAME: str: “Battery2Quantity” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2Quantity(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2RatedVoltage

ID: number: 0x0054 the ID of this attribute

NAME: str: “Battery2RatedVoltage” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2RatedVoltage(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2AlarmMask

ID: number: 0x0055 the ID of this attribute

NAME: str: “Battery2AlarmMask” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatteryAlarmMaskType object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2AlarmMask(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatteryAlarmMaskType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2VoltageMinThreshold

ID: number: 0x0056 the ID of this attribute

NAME: str: “Battery2VoltageMinThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2VoltageMinThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2VoltageThreshold1

ID: number: 0x0057 the ID of this attribute

NAME: str: “Battery2VoltageThreshold1” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2VoltageThreshold1(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2VoltageThreshold2

ID: number: 0x0058 the ID of this attribute

NAME: str: “Battery2VoltageThreshold2” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2VoltageThreshold2(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2VoltageThreshold3

ID: number: 0x0059 the ID of this attribute

NAME: str: “Battery2VoltageThreshold3” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2VoltageThreshold3(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2PercentageMinThreshold

ID: number: 0x005A the ID of this attribute

NAME: str: “Battery2PercentageMinThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2PercentageMinThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2PercentageThreshold1

ID: number: 0x005B the ID of this attribute

NAME: str: “Battery2PercentageThreshold1” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2PercentageThreshold1(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2PercentageThreshold2

ID: number: 0x005C the ID of this attribute

NAME: str: “Battery2PercentageThreshold2” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2PercentageThreshold2(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2PercentageThreshold3

ID: number: 0x005D the ID of this attribute

NAME: str: “Battery2PercentageThreshold3” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2PercentageThreshold3(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery2AlarmState

ID: number: 0x005E the ID of this attribute

NAME: str: “Battery2AlarmState” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatteryAlarmStateType object of this attribute with any additional features provided for the attribute

This is also usable with the Battery2AlarmState(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatteryAlarmStateType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3Voltage

ID: number: 0x0060 the ID of this attribute

NAME: str: “Battery3Voltage” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3Voltage(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3PercentageRemaining

ID: number: 0x0061 the ID of this attribute

NAME: str: “Battery3PercentageRemaining” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3PercentageRemaining(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3Manufacturer

ID: number: 0x0070 the ID of this attribute

NAME: str: “Battery3Manufacturer” the name of this attribute

data_type: st.zigbee.data_types.CharString: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.CharString) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a CharString object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3Manufacturer(…) syntax

Parameters: vararg (vararg) – the values needed to construct a CharString
Return type: st.zigbee.data_types.CharString

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.CharString) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.CharString) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3Size

ID: number: 0x0071 the ID of this attribute

NAME: str: “Battery3Size” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatterySizeType object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3Size(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatterySizeType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3AHrRating

ID: number: 0x0072 the ID of this attribute

NAME: str: “Battery3AHrRating” the name of this attribute

data_type: st.zigbee.data_types.Uint16: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint16) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint16 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3AHrRating(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint16
Return type: st.zigbee.data_types.Uint16

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint16) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint16) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3Quantity

ID: number: 0x0073 the ID of this attribute

NAME: str: “Battery3Quantity” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3Quantity(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3RatedVoltage

ID: number: 0x0074 the ID of this attribute

NAME: str: “Battery3RatedVoltage” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3RatedVoltage(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3AlarmMask

ID: number: 0x0075 the ID of this attribute

NAME: str: “Battery3AlarmMask” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatteryAlarmMaskType object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3AlarmMask(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatteryAlarmMaskType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3VoltageMinThreshold

ID: number: 0x0076 the ID of this attribute

NAME: str: “Battery3VoltageMinThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3VoltageMinThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3VoltageThreshold1

ID: number: 0x0077 the ID of this attribute

NAME: str: “Battery3VoltageThreshold1” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3VoltageThreshold1(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3VoltageThreshold2

ID: number: 0x0078 the ID of this attribute

NAME: str: “Battery3VoltageThreshold2” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3VoltageThreshold2(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3VoltageThreshold3

ID: number: 0x0079 the ID of this attribute

NAME: str: “Battery3VoltageThreshold3” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3VoltageThreshold3(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3PercentageMinThreshold

ID: number: 0x007A the ID of this attribute

NAME: str: “Battery3PercentageMinThreshold” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3PercentageMinThreshold(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3PercentageThreshold1

ID: number: 0x007B the ID of this attribute

NAME: str: “Battery3PercentageThreshold1” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3PercentageThreshold1(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3PercentageThreshold2

ID: number: 0x007C the ID of this attribute

NAME: str: “Battery3PercentageThreshold2” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3PercentageThreshold2(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3PercentageThreshold3

ID: number: 0x007D the ID of this attribute

NAME: str: “Battery3PercentageThreshold3” the name of this attribute

data_type: st.zigbee.data_types.Uint8: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.data_types.Uint8) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a Uint8 object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3PercentageThreshold3(…) syntax

Parameters: vararg (vararg) – the values needed to construct a Uint8
Return type: st.zigbee.data_types.Uint8

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.data_types.Uint8) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

write(device, value)

Write a value to this attribute on a device

Parameters

device (st.zigbee.Device) –
value (st.zigbee.data_types.Uint8) – the value to write

set_parent_cluster(cluster)

Parameters: cluster (any) –

class st.zigbee.zcl.clusters.PowerConfiguration.Battery3AlarmState

ID: number: 0x007E the ID of this attribute

NAME: str: “Battery3AlarmState” the name of this attribute

data_type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState: the data type of this attribute

augment_type(base_type_obj)

Parameters: base_type_obj (any) –

build_test_attr_report(device, data)

Build a Rx Zigbee message as if a device reported this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – the attribute value

Returns

containing an AttributeReport body

Return type

st.zigbee.ZigbeeMessageRx

build_test_read_attr_response(device, data)

Build a Rx Zigbee message as if a device sent a read response for this attribute

Parameters

device (st.zigbee.Device) –
data (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – the attribute value

Returns

containing an ReadAttributeResponse body

Return type

st.zigbee.ZigbeeMessageRx

new_value(...)

Create a BatteryAlarmStateType object of this attribute with any additional features provided for the attribute

This is also usable with the Battery3AlarmState(…) syntax

Parameters: vararg (vararg) – the values needed to construct a BatteryAlarmStateType
Return type: st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState

read(device)

Construct a st.zigbee.ZigbeeMessageTx to read this attribute from a device

Parameters: device (st.zigbee.Device) –
Returns: containing a ReadAttribute body
Return type: st.zigbee.ZigbeeMessageTx

configure_reporting(device, min_rep_int, max_rep_int, rep_change)

Construct a st.zigbee.ZigbeeMessageTx to configure this attribute for reporting on a device

Parameters

device (st.zigbee.Device) –
min_rep_int (number or st.zigbee.data_types.Uint16) – the minimum interval allowed between reports of this attribute
max_rep_int (number or st.zigbee.data_types.Uint16) – the maximum interval allowed between reports of this attribute
rep_change (st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState) – The amount of change of the attribute to trigger a report

Returns

containing a ConfigureReporting body

Return type

st.zigbee.ZigbeeMessageTx

set_parent_cluster(cluster)

Parameters: cluster (any) –

PowerConfiguration Commands

PowerConfiguration Types

class st.zigbee.zcl.clusters.PowerConfiguration.types.BatterySize: st.zigbee.data_types.Enum8 

byte_length: number: 1

NO_BATTERY: number: 0

BUILT_IN: number: 1

OTHER: number: 2

AA: number: 3

AAA: number: 4

C: number: 5

D: number: 6

CR2: number: 7

CR123A: number: 8

UNKNOWN: number: 255

class st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmMask: st.zigbee.data_types.Bitmap8 

byte_length: number: 1

BATTERY_VOLTAGE_TOO_LOW: number: 1

BATTERY_ALARM1: number: 2

BATTERY_ALARM2: number: 4

BATTERY_ALARM3: number: 8

is_battery_voltage_too_low_set()

Returns: True if the value of BATTERY_VOLTAGE_TOO_LOW is non-zero
Return type: boolean

set_battery_voltage_too_low(): Set the value of the bit in the BATTERY_VOLTAGE_TOO_LOW field to 1

unset_battery_voltage_too_low(): Set the value of the bits in the BATTERY_VOLTAGE_TOO_LOW field to 0

is_battery_alarm1_set()

Returns: True if the value of BATTERY_ALARM1 is non-zero
Return type: boolean

set_battery_alarm1(): Set the value of the bit in the BATTERY_ALARM1 field to 1

unset_battery_alarm1(): Set the value of the bits in the BATTERY_ALARM1 field to 0

is_battery_alarm2_set()

Returns: True if the value of BATTERY_ALARM2 is non-zero
Return type: boolean

set_battery_alarm2(): Set the value of the bit in the BATTERY_ALARM2 field to 1

unset_battery_alarm2(): Set the value of the bits in the BATTERY_ALARM2 field to 0

is_battery_alarm3_set()

Returns: True if the value of BATTERY_ALARM3 is non-zero
Return type: boolean

set_battery_alarm3(): Set the value of the bit in the BATTERY_ALARM3 field to 1

unset_battery_alarm3(): Set the value of the bits in the BATTERY_ALARM3 field to 0

class st.zigbee.zcl.clusters.PowerConfiguration.types.BatteryAlarmState: st.zigbee.data_types.Bitmap32 

byte_length: number: 4

BATTERY1MIN_THRESHOLD: number: 1

BATTERY1THRESHOLD1: number: 2

BATTERY1THRESHOLD2: number: 4

BATTERY1THRESHOLD3: number: 8

BATTERY2MIN_THRESHOLD: number: 1024

BATTERY2THRESHOLD1: number: 2048

BATTERY2THRESHOLD2: number: 4096

BATTERY2THRESHOLD3: number: 8192

BATTERY3MIN_THRESHOLD: number: 1048576

BATTERY3THRESHOLD1: number: 2097152

BATTERY3THRESHOLD2: number: 4194304

BATTERY3THRESHOLD3: number: 8388608

MAINS_POWER_SUPPLY_LOST: number: 1073741824

is_battery1min_threshold_set()

Returns: True if the value of BATTERY1MIN_THRESHOLD is non-zero
Return type: boolean

set_battery1min_threshold(): Set the value of the bit in the BATTERY1MIN_THRESHOLD field to 1

unset_battery1min_threshold(): Set the value of the bits in the BATTERY1MIN_THRESHOLD field to 0

is_battery1threshold1_set()

Returns: True if the value of BATTERY1THRESHOLD1 is non-zero
Return type: boolean

set_battery1threshold1(): Set the value of the bit in the BATTERY1THRESHOLD1 field to 1

unset_battery1threshold1(): Set the value of the bits in the BATTERY1THRESHOLD1 field to 0

is_battery1threshold2_set()

Returns: True if the value of BATTERY1THRESHOLD2 is non-zero
Return type: boolean

set_battery1threshold2(): Set the value of the bit in the BATTERY1THRESHOLD2 field to 1

unset_battery1threshold2(): Set the value of the bits in the BATTERY1THRESHOLD2 field to 0

is_battery1threshold3_set()

Returns: True if the value of BATTERY1THRESHOLD3 is non-zero
Return type: boolean

set_battery1threshold3(): Set the value of the bit in the BATTERY1THRESHOLD3 field to 1

unset_battery1threshold3(): Set the value of the bits in the BATTERY1THRESHOLD3 field to 0

is_battery2min_threshold_set()

Returns: True if the value of BATTERY2MIN_THRESHOLD is non-zero
Return type: boolean

set_battery2min_threshold(): Set the value of the bit in the BATTERY2MIN_THRESHOLD field to 1

unset_battery2min_threshold(): Set the value of the bits in the BATTERY2MIN_THRESHOLD field to 0

is_battery2threshold1_set()

Returns: True if the value of BATTERY2THRESHOLD1 is non-zero
Return type: boolean

set_battery2threshold1(): Set the value of the bit in the BATTERY2THRESHOLD1 field to 1

unset_battery2threshold1(): Set the value of the bits in the BATTERY2THRESHOLD1 field to 0

is_battery2threshold2_set()

Returns: True if the value of BATTERY2THRESHOLD2 is non-zero
Return type: boolean

set_battery2threshold2(): Set the value of the bit in the BATTERY2THRESHOLD2 field to 1

unset_battery2threshold2(): Set the value of the bits in the BATTERY2THRESHOLD2 field to 0

is_battery2threshold3_set()

Returns: True if the value of BATTERY2THRESHOLD3 is non-zero
Return type: boolean

set_battery2threshold3(): Set the value of the bit in the BATTERY2THRESHOLD3 field to 1

unset_battery2threshold3(): Set the value of the bits in the BATTERY2THRESHOLD3 field to 0

is_battery3min_threshold_set()

Returns: True if the value of BATTERY3MIN_THRESHOLD is non-zero
Return type: boolean

set_battery3min_threshold(): Set the value of the bit in the BATTERY3MIN_THRESHOLD field to 1

unset_battery3min_threshold(): Set the value of the bits in the BATTERY3MIN_THRESHOLD field to 0

is_battery3threshold1_set()

Returns: True if the value of BATTERY3THRESHOLD1 is non-zero
Return type: boolean

set_battery3threshold1(): Set the value of the bit in the BATTERY3THRESHOLD1 field to 1

unset_battery3threshold1(): Set the value of the bits in the BATTERY3THRESHOLD1 field to 0

is_battery3threshold2_set()

Returns: True if the value of BATTERY3THRESHOLD2 is non-zero
Return type: boolean

set_battery3threshold2(): Set the value of the bit in the BATTERY3THRESHOLD2 field to 1

unset_battery3threshold2(): Set the value of the bits in the BATTERY3THRESHOLD2 field to 0

is_battery3threshold3_set()

Returns: True if the value of BATTERY3THRESHOLD3 is non-zero
Return type: boolean

set_battery3threshold3(): Set the value of the bit in the BATTERY3THRESHOLD3 field to 1

unset_battery3threshold3(): Set the value of the bits in the BATTERY3THRESHOLD3 field to 0

is_mains_power_supply_lost_set()

Returns: True if the value of MAINS_POWER_SUPPLY_LOST is non-zero
Return type: boolean

set_mains_power_supply_lost(): Set the value of the bit in the MAINS_POWER_SUPPLY_LOST field to 1

unset_mains_power_supply_lost(): Set the value of the bits in the MAINS_POWER_SUPPLY_LOST field to 0